iBootBar
– Precision Version
Page 16
iBootBar_Precision_20160428e.doc
Firmware ver 1.41.32
set user <name> email <email address 64 char max>
set user <name> sendmail <yes/no>
SNMP
Up to four SNMP managers can be set. Each manager will receive Trap notifications for outlet changes, autoping
and current alarms. Set the SNMP manager IP addresses using the
set snmp <n> ipaddress <dotted decimal>
command. Enable or Disable SNMP for any manager with the
set snmp <n> enable <yes/no>
command.
Firmware Upgrades
The iBootBar can be upgraded via the network if the upload feature has been enabled using the
set upload enable yes
command on the console interface. To upgrade the iBootBar download the latest version of the firmware and
upgrade utility from the Dataprobe website.
http://Dataprobe.com/ibootbartools.html
Password Recovery
Holding the reset button on the front panel of the iBootBar for 5 seconds or longer will initiate a password recovery
mode. Once the reset button is released, the user has 30 seconds to log in to the CLI using the username
admin
and password
admin
. Upon accessing the CLI, change the username and password for User 1 as desired.
Other Utilities
Copies of this manual, firmware upgrade files and other resources are available on the Dataprobe website.
Please visit
http://Dataprobe.com/support_ibootbar.html
for further information.
