iboot-poe_v180808n
iBoot-PoE
Page 26
set event <1-8> date <mm/dd/yyyy>
This command is used to set the scheduled action’s start date.
set event <1-8> time <hh:mm>
This command is used to set the time the scheduled action will occur in 24 hour
format.
set event <1-8> action <on | off | cycle>
This command is used to set the scheduled action.
set event <1-8> repeat <day | hour | minute>
This command is used to set how often the scheduled action will repeat.
set event <1-8> mult <0-999>
This command sets how often the event will repeat, the number of increments (as
set by the command above) before the next event.
del event <1-8>
This command deletes the specified event
Prompts
The CLI will use the following prompts:
User>
This prompts the user to enter his user name (user or admin). This is the first
prompt that the user is presented with.
Password>
This prompts the user to enter his password.
iBoot >
This is the prompt that will be displayed after the user has successfully logged in.
iBoot Reboot Required>
This is the prompt that will be displayed whenever there have been changes made
that require a reboot. This prompt will remain the active prompt until the iBoot-PoE
has been rebooted.
