iboot-poe_v180808n
iBoot-PoE
Page 14
5.3.
Advanced Network Settings
HTTP Port: This setting is used to
allow access to iBoot-PoE on a port
other than the Web standard Port 80.
If the port is changed, you will need to
identify the port number when you
enter iBoot's IP address into your
browser. If the new port is 8080 then
use the address
http://192.168.1.254:8080.
Linkback URL: This setting allows
control of the hotlink displayed on the
Goodbye page. It allows use of the
public IP address or DNS name
instead of the internal IP Address of
the iBoot-PoE, which is the default
setting. If this setting is left blank, the
hotlink will be the IP Address of the
unit. Enter up to 128 characters.
Telnet Port: This setting is used to allow access to the iBoot-PoE via telnet by ports other than standard
23.
DxP Port: This setting is used to allow access to the iBoot-PoE via Dataprobe Exchange Protocol (DxP)
via ports other than standard 9100.
Enable Cloud Services: This setting enables the iBoot for iBoot Cloud Services (iBCS). iBCS allows the
iBoot to be monitored and controlled from a web portal from any browser. It allows multiple iBoots to be
managed from a single portal. For a complete description of iBCS and setup instructions, see Section 6.
Note:
Some of the TCP/IP Settings require a reboot of the iBoot-PoE, after clicking Save. A
Reboot button will appear at the bottom of the page when it is necessary. The new settings will
not take effect until the unit is rebooted. Reboot will not affect the power position of the iBoot-PoE.
Upon Clicking Reboot, the Googbye page is displayed with a link to re-login.
5.4.
Time Setup
The Advanced Network Setup page also allows setup of the Time server, required for Scheduling and
Logging functions.
Enable: Enable or Disable the use of the Time Server with this checkbox
Time Server: Enter the Time Server. The default is
time.nist.gov
Time Zone: Enter the Time Zone (-12 to +12) relative to GMT
DST Enable: Enable or Disable the use of Daylight Savings Time with this checkbox
DST Start / Stop: Enter the start and stop parameters of Daylight Savings Time here.
