Datapath VSN400 Series Скачать руководство пользователя страница 44

Страница: 44 / 59

SoftSQX is included in as part of Wall Control-SQX. In addition to using the Wall Control-SQX, users are able to take

advantage of SQXEasy to create their own applications (in place of Wall Control-SQX) to leverage the CPU decoding,

with or without an ActiveSQX. To use SoftSQX you require an ImageDP4 in the system.

Streaming Methods

Multicast & Unicast support

Streaming Codecs

H.264 (Mpeg4 Part 10 AVC), VC-1, MPEG2 Part 2

Streaming Containers

MPEG4 part 1, MPEG2-TS, WMV, MOV

Streaming Protocols

RTSP Only (For additional streaming protocols an ActiveSQX decoding card will be

required)

Decode Density

Approximately 8 streams of 1920x1080p 30 frames per second can be decoded de-

pending on Profiles and Levels used.

De-interlacing

Not Supported

Stream Authentication

Basic & Digest Stream Authentication

H.264 Profiles

Constrained Baseline Profile (CBP) / Main Profile (MP) / High Profile (HiP)

H.264 Levels

Level 3 / 3.1 / 4 / 4.1 / 4.2 / 5 / 5.1 / 5.2

Colour Format

NV12 4:2:0

Hardware Requirements

SoftSQX requires a system that includes a Datapath Graphics Card

7.4 Software Utilities

Datapath provides a group of software utilities designed to assist you fine tune your system for specific individual sys

tem requirements. All the software utilities can be found on the Recovery Media that was shipped with your system,

alternatively, you can download the most up-to-date versions from the Datapath website.

7.4.1 Desktop Utility

Used to define a desktop resolution which can compensate for display bezels or projector overlap.

7.4.2 Custom Mode Utility

A utility for defining custom display timings for video modes not available in the display driver or EDID.

7.4.3 Diagnostic Tool (diagtool)

A diagnostic tool that gathers information to assist in diagnosing problems with hardware and software configura

tions. Information is gathered and compressed into a zip file for onward transmission to the Datapath Support Team.

7.4.4 PCICFG Tool

A diagnostic program that prints out the PCI configuration information. Note, this tool must be run from either a USB

or MSDOS boot disk, it cannot be run from Windows.

7.4.5 Sleep Utility

Designed to generate a pause within a script. This can be used when sequencing the loading of files or application

windows.

Software

Содержание VSN400 Series




























































Результаты поиска

Содержание VSN400 Series

Отзывы:

Похожие инструкции для VSN400 Series

Бренды по названию

Популярные бренды

Datapath VSN400 Series, Руководство пользователя

Результаты поиска

Содержание VSN400 Series

Отзывы:

Похожие инструкции для VSN400 Series

Бренды по названию

Популярные бренды