Operation
Operation
It is strongly recommended that measurements are taken from the display manufacturers specifications if available.
Once a layout has been designed and the type of displays have been selected you can add the displays to the
representation by clicking on the “Add Displays” icon or “Layout Configurations” if LED modules are being used.
When displayed on the Representation Grid”, each display can be configured separately by clicking on it. Use the tools
to position your displays creating the desired layout. To deselect the display, click on it again.
When the display wall or display group has been finalised click on “Continue” and the following page is displayed:
6.3.11 Add Groups
At this stage of the set up you can choose to create another independent display group from the same system, this
would be considered if one machine will be used to drive a number of separate video walls.
Click on the “Add Another Display Group” should you wish to add another group of displays, this will return you to the
“Display Technology” page. It should be noted that when creating new display groups there is no restriction to the
type of display technology you can use for each group you create.
If another display group is not required, click on “Finish” and the following page is displayed.
31
