Datamax I-Class Mark II I-4212E/203, Руководство оператора

Страница: 79 / 94

Appendix A – Specifications 73
Approved Media
To achieve optimum print quality and maximum printhead life, Datamax-O’Neil specifies the use of
Datamax-O’Neil brand media and ribbons. These supplies are specially formulated for use in our
printers; use of non-Datamax-O’Neil supplies may affect the print quality, performance, and life of
the printer or its components.
For a current list of approved media and ribbons for use in direct thermal and thermal transfer
applications, please contact a Media Representative at (407) 523-5650.
E
J
I
C
K
A
B
D
H
F
G
Side View
Top View
Media Dimensional Requirements
Designator Description Minimum
[1]
Maximum
[1]
A Label width 1.00 4.65
B Liner width 1.00 4.65
C Gap (or notch) between labels
[3]
.10 –
D Label length
[3]
.25 –
E Media thickness .0025 .010
F Notch opening width .20 .500
G Media edge to sensor aperture distance .20 2.25
H Reflective (black) mark width [2] .50 4.65
I Distance between reflective marks [3] .50 –
J Reflective mark length
[3]
.10 –
K Label repeat distance
[3]
.35 –
[1]
Units of measure are given in inches and referenced by the direction of label feed.
[2]
The reflective (black) mark must be carbon based, placed on the backside of the stock, and the
reflectance shall be less than 10% at wavelengths of 950 and 640 nm.
[3]
The maximum allowable length of the combined label and gap (or mark) measurement cannot
exceed 99.99 inches.