Dataman 448PRO2, Руководство пользователя, Страница: 149 / 168

PG4UWMC
149
Search for programmers
Evaluate what was found
Check the legend (for help what to do)
Resolve problems to meet restrictions
Enable, Disable, Move, Remove programmers as you desire
Apply changes or Cancel.
Search in Programmers group on network
From this point, working with PG4UWMC should be as usual.
Troubleshooting
If searching programmers does not finish as expected, please check following:
each computer in Programmers group must run PG4UWMC Network Agent with same
Programmers group
your firewall settings may block network communication, please check firewall rules or
temporally disable firewall.
Command line parameters
Program PG4UWMC supports following command line parameters:
/prj:<file_name>
Loads project file. Parameter <file_name> means full or relative project file path and name.
There is also available to make Load project operation from command line by entering project
file name without prefix /prj...
Example:
pg4uwmc.exe c:\projects\myproject.eprj
Makes load project file "c:\projects\myproject.eprj".
/autoconnectsites