Dataman 448PRO2, Руководство пользователя, Страница: 142 / 168

142
Automatic YES! Settings
In this mode you just take off the programmed device, then put new device into ZIF socket and
a last operation will be repeated automatically. Program automatically detects an insertion of a
new device and runs last executed operation without pressing any key or button. An insertion
of device into ZIF is displayed on the screen. Repeated operation executing will be canceled
by pressing key <Esc> during waiting for insert/remove a device to/from ZIF.
This feature may not be available for some types of programmers.
Use settings according to the last loaded project file - Automatic YES! options is set by the
settings in project file. One of the setting's items of Automatic YES! is 'Pins of programmer's
ZIF excluded from sensing', which is depend on used programming adapter. Because it is
possible that different programmers use different programming adapters for same device, this
setting will be ignored in this case and in the log window you can find following sentence:
"None connected pins setting was not accepted due to different programming adapter. Please
use automatic YES wizard again." If this case occur go on master programming site (if you run
PG4UWMC with option 'Use Site #1 project for all Sites') or on programming site which wrote
previous mentioned sentence to log and click on the button 'Setting Automatic YES!
parameters' in Programmer / Automatic YES! options.
Settings of 'Indication of state when software waits for a new device' and 'Enable sound when
ready for a new device' is not stored in project file.
Enabled - Automatic YES! function is enabled on all connected programming site with
parameters set by PG4UWMC.
Disabled - Automatic YES! function is disabled on all connected programming site. Use this
setting if you need to use button YES! for starting a next operation with the programmed
device.
Response time - interval between insertion of the chip into the ZIF socket and the start of
selected device operation. If longer positioning of the chip in the ZIF socket is necessary select
elongated response time.