background image

ii 

 

 

 

 

 

 

 

Datalogic Automation, Inc. 

6301 West Old Shakopee Rd  Suite A 

Bloomington MN 55438 

USA 

 

 

 

 

T4x-Series™ Reference Manual 

 

Edited: 07/2013 

 

 

 

 

 

 

 

© 2013 Datalogic Automation, Inc. 

 ALL RIGHTS RESERVED. 

 Protected to the fullest extent under 

U.S. and international laws. Copying or altering of this document is prohibited without express written 

consent from Datalogic Automation, Inc. (DLA)  

 

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, 

including the U.S.A. and the E.U. 

 

T4x-Series, Vision Program Manager, Control Panel Manager, and Impact are trademarks of Datalogic 

Automation S.r.l. All other brand and product names mentioned herein are for identification purposes only 

and may be trademarks or registered trademarks of their respective owners. 

 

DLA makes no representations or warranties for merchantability or fitness for any particular purpose, 

regarding DLA’s software or hardware. DLA shall not be liable for errors contained herein or for incidental 

or consequential damages in connection with the furnishing, performance, or use of this publication or its 

contents. 

 

DLA reserves the right to revise this publication from time to time and to make changes in the content 

hereof without obligation to notify any person of such revision or changes. 

 

 

 

Printed 9 July 2013 

 

 

Содержание T4 Series























Отзывы: