Datalogic T4 Series, Быстрый старт

Страница: 7 / 22

CONNECT THE SYSTEM
7
• Power Supply Connection
Use the PG-120 power Kit (3 versions for European, UK or US plug) and CAB-PG-0002 +
BA400 connector to connect the PG-120 to the CBX. An alternative power supply to the PG-
120 is the PWR-120.
• CBX Connection
Use CAB-SCSxx between the T4x-Series camera and the CBX for power, external trigger
device (photocell), and additional I/O connections.
Use the CAB-GE0x for the Gigabit Ethernet connection to the host.
NOTE
The T4x-Series does not support sourcing power towards the CBX in order
to power I/O devices. These devices must be powered through the CBX or
from an external source.
CAUTION
Do not connect GND and SGND to different (external) ground references.
GND and SGND are internally connected through filtering circuitry which
can be permanently damaged if subjected to voltage drops over 0.8 Vdc.