Datalogic PowerScan PD9530, Руководство по продукции

Страница: 246 / 362

Enter/Exit Programming Mode
236 PowerScan™ PD9530/PBT9500/PM9500
PM9500-ONLY FEATURES
The features in this section are valid only for the PowerScan PM9500 Star
model:
• STAR Radio Protocol Timeout on page 236
• STAR Radio Transmit Mode on page 237
STAR Radio Protocol Timeout
This parameter sets the valid wait time before transmission between the
handheld reader and Base Station is considered failed.
When setting this parameter, take into consideration the radio traffic (num-
ber of readers in the same area). The selectable range for this feature is
from 02 to 25 seconds. See page 305 in “References” for detailed informa-
tion and examples for setting this feature.
Set Radio Protocol Timeout
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by two digits from the Alphanumeric
characters in
Appendix D, Keypad
representing
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
02 = 2 Seconds Radio Protocol Timeout