Datalogic DX8200, Руководство по установке, Страница: 12 / 66

x
The laser light is visible to the human eye and is emitted from the windows on the lower side
of the reader (Figure A, 3).
Warning labels indicating exposure to laser light and the device classification are applied
onto the body of the scanner (Figure A, 5 and 2):
Warning and device class labels
Disconnect the power supply when opening the device during maintenance or installation to
avoid exposure to hazardous laser light.
The laser diodes used in this device are classified as Class 3B laser products according to
IEC 825-1 regulations and as Class IIIb laser products according to CDRH regulations. As it is
not possible to apply a classification label on the laser diodes used in this device, the
following label is reproduced here:
Laser diode class label
Any violation of the optic parts in particular can cause radiation up to the maximum level of
the laser diode (35 mW at 630~680 nm).
DATALOGIC S.p.A. Via Candini, 2
40012 Calderara di Reno - Bologna - Italy
Manufactured
Model No.
Serial No.
Volt
Amp.
N2468
This product conforms to the applicable requirements
of 21CFR1040 at the date of manufacture.
LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
MAXIMUM OUTPUT RADIATION 35 mW
EMITTED WAVELENGTH 630-680 nm
TO IEC 825-1 (1993)