Datalogic DS2400N, Справочное руководство

Страница: 31 / 85

INTRODUCTION
2
2.3.2 X-PRESS™ Functions
Quick access to the following functions is
provided by an easy procedure using the push
button:
1 –
Press the button (the F0 LED will give a
visual feedback).
2 – Hold the button until the specific function
LED is on (F1, F2 or F3).
3 – Release the button to enter the specific
function.
F4
F3
F2
F1
F0
READY
GOOD
TRIGGER
COM
STATUS
AutoSetup
AutoLearn
Test Mode
Exit
Once button is pressed, the cycle of LEDs activation is as follows:
F4
F3
F2
F1
F0
READY
GOOD
TRIGGER
COM
STATUS
F4
F3
F2
F1
F0
READY
GOOD
TRIGGER
COM
STATUS
F4
F3
F2
F1
F0
READY
GOOD
TRIGGER
COM
STATUS
Release button to
Exit Release button to
enter Test Mode Release button to
enter AutoLearn
F4
F3
F2
F1
F0
READY
GOOD
TRIGGER
COM
STATUS
F4
F3
F2
F1
F0
READY
GOOD
TRIGGER
COM
STATUS
Release button to
enter AutoSetup
(cycle)
Release button to
Exit
Test Mode (F1) Function
Once entered, the Bar Graph on the five LEDs is activated and if the scanner starts
reading barcodes the Bar-Graph shows the Good Read Rate. In case of no read
condition, only the STATUS LED is on and blinks.
To exit the Test Mode, press the X-PRESS™ push button once.
21