Datalogic DLR-BT001 Series, Руководство по продукции

Страница: 6 / 49

RFID Reader DLR-BT001
2 RFID Bluetooth® Pocket Reader DLRBT001
General Features
The DLR-BT001-XX supports a Bluetooth® native key-
board emulation allowing to interact directly with legacy
application, office automation SW or any other generic
solution requiring manual input. When paired to a smart-
phone or to a tablet, the Device is a cost-effective alterna-
tive to more expensive handheld devices. Designed for
mobile operators in indoor or outdoor
1
areas, DLR-BT001-
XX is ideal for in-store inventory management, field sales
mobility, service & maintenance applications.
The device easily performs the reading of a population of
UHF Tags being located in its proximity and preferably in
front of it.
When the Host / Reader Link is not available, the reader is
able to operate in "Buffer Profile", allowing the storage of
EPC codes into its internal memory for a later download.
Special attention has been given to minimize the current
consumption and extend battery duration by limiting the
active reading time.
A USB connection is mainly dedicated to battery charge,
but could act as an auxiliary virtual com port (VCP) useful
during setup, configuration and downloading actions.
Using the DLR-BT001
The DLR-BT001-XX is a hand-held UHF RFID reader with
integrated antenna. The reader can send EPC codes to a
PC, tablet or smartphone via USB or Bluetooth. The
reader’s front panel is the user interface.
1. Pay attention to the weather conditions because the
device is not waterproof.