Datalink Systems i50, Руководство пользователя

Страница: 68 / 75

i50 Manual (5.51) Page 68
© 2018 Datalink Systems, Inc. www.datalinksystemsinc.com
ID Name Description Default
19 I_INPUT4 Input 4 Setting. See note at bottom for values
0
20 I_USEINPUT1 Send events when Input 1 changes. Bit 0=Low. Bit 1=High
0
21 I_USEINPUT2 Send events when Input 2 changes. Bit 0=Low. Bit 1=High
0
22 I_USEINPUT3 Send events when Input 3 changes. Bit 0=Low. Bit 1=High
0
23 I_USEINPUT4 Send events when Input 4 changes. Bit 0=Low. Bit 1=High
0
24 I_INPOLARITY1 Input 1 polarity (0=Active Low 1=Active High)
0
25 I_INPOLARITY2 Input 2 polarity (0=Active Low 1=Active High)
0
26 I_INPOLARITT3 Input 3 polarity (0=Active Low 1=Active High)
0
27 I_INPOLARITY4 Input 4 polarity (0=Active Low 1=Active High)
0
28 I_USEIGN Send events when IGN changes. Bit 0=Low. Bit 1=High
0
29 I_OUTPUT1 Output 1 Setting. See note at bottom for values
32
30 I_OUTPUT2 Output 2 Setting. See note at bottom for values
32
31 I_OUTPUT3 Output 3 Setting. See note at bottom for values
32
32 I_OUTPOLARITY1 Output 1 polarity. See note at bottom for values
1
33 I_OUTPOLARITY2 Output 2 polarity. See note at bottom for values
1
34 I_OUTPOLARITY3 Output 3 polarity. See note at bottom for values
1
35 I_RFSPEED RF COM Speed. See note at bottom for values
4
36 I_TRANSSPEED Transparent COM Speed. See note at bottom for values
4
37 I_WAYPT Enable Waypoint reports (1=Yes 0=No)
0
38 I_USEDISTLO Use city distance reports (1=Yes 0=No)
0
39 I_USEDISTHI Use highway distance reports (1=Yes 0=No)
0
40 I_USETIMELO
Use city time reports. Bit 0=Enable.
Bit 1=Don’t send while IGN off. Bit 2=Don’t
send while stationary
0
41 I_USETIMEHI Use highway time reports (1=Yes 0=No)
0
42 I_USEOVERSPD Send overspeed alerts (1=Yes 0=No)
0
43 I_USESTOPS Send Stop alerts (2=Position Only 1=Send Event 0=No)
0
44 I_USESTARTS Send Start alerts (2=Position Only 1=Send Event 0=No)
0
45 I_USEACCEL
Use accelerometer to detect motion, instead of OBD or GPS speed (1=Yes
0=No) 0
46 I_USEINTGPS Use internal GPS (1=Yes 0=No)
1
47 I_GSSPEED Globalstar COM Speed. See note at bottom for values
11
48 I_GPSSPEED GPS COM Speed. See note at bottom for values
7
49 I_JSPEED OBD-II COM Speed. See note at bottom for values
7
50 I_TRANSBITS
Transparent COM settings. Bits 0-1=(Data bits-5). Bit 2=Extra Stop bits. Bit
3=Parity. Bit 4=Even 3
51 I_JREPDIAG OBD-II diag codes events 0=Off 1=Display 2=Send 3=Display and Send
0
52 I_JREPREV OBD-II high rev events. See I_JREPDIAG for values
0
53 I_JREPBRK Not used
0
54 I_JREPACC Not used
0
55 I_JREPCOOL OBD-II high coolant temp events. See I_JREPDIAG for values
0
56 I_JREPTRANS Not used
0
57 I_JREPOIL Not used
0
58 I_JREPFUEL Not used
0
59 I_IPMODEMTYPE 0=External Cell 1=Cypress 2=AirLink 3=Internal Cell 4=Enfora Cell 5=BlueTree 3
60 I_JREPOILPRESS Not used
0
61 I_MINSATS Number of GPS sats required for valid signal. Range=0-12
0
62 I_DIALSPEED Dial-up and messaging/status port COM Speed. See note at bottom for values 9