Datakom D-500 MK3, Руководство пользователя

Страница: 192 / 197

D-500 MK3 User Manual Firmware V-7.5
- 192 -
ADDRESS
(decimal)
R / W DATA
SIZE
COEFF. DESCRIPTION
10504-
10519
R 256bit - Shutdown alarm bits. Bit definitions are given at the end of the
document.
10520-
10535
R 256bit - Loaddump alarm bits. Bit definitions are given at the end of the
document.
10536-
10551
R 256bit - Warning alarm bits. Bit definitions are given at the end of the
document.
10604 R 16bit - Unit operation status
0= genset at rest
1= wait before fuel
2= engine preheat
3= wait oil flash off
4=crank rest
5=cranking
6= engine run idle speed
7= engine heating
8= running off load
9= synchronizing to mains
10= load transfer to genset
11= gen cb activation
12= genset cb timer
13= master genset on load,
14= peak lopping
15= power exporting
16= slave genset on load
17= synchronizing back to mains
18= load transfer to mains
19= mains cb activation
20= mains cb timer
21= stop with cooldown
22= cooling down
23= engine stop idle speed
24= immediate stop
25= engine stopping
10605 R 16bit - Unit mode
0= STOP mode
1= AUTO mode
2= MANUAL mode
3= TEST mode
10606 R 16bit x1 Genset operation timer. In various wait statuses, the genset
operation status will change at the expiration of this timer.
10610 R 16bit - Device hardware version information
10611 R 16bit - Device software version information
10616 R 32bit x1 Counter: number of genset runs
10618 R 32bit x1 Counter: number of genset cranks
10620 R 32bit x1 Counter: number of genset on load
10622 R 32bit x100 Counter: engine hours run
10624 R 32bit x100 Counter: engine hours since last service
10626 R 32bit x100 Counter: engine days since last service
10628 R 32bit x10 Counter: genset total active energy (kWh)
10630 R 32bit x10 Counter: genset total inductive reactive energy (kVArh-ind)
10632 R 32bit x10 Counter: genset total capacitive reactive energy (kVArh-cap)
10634 R 32bit x100 Counter: remaining engine hours to service-1
10636 R 32bit x100 Counter: remaining engine days to service-1
10638 R 32bit x100 Counter: remaining engine hours to service-2
10640 R 32bit x100 Counter: remaining engine days to service-2
10642 R 32bit x100 Counter: remaining engine hours to service-3
10644 R 32bit x100 Counter: remaining engine days to service-3