Datakom D-100 MK2, Руководство пользователя

Страница: 59 / 123

D-100 MK2 User Manual Firmware V-6.3
K96D01-EN - 59 -
ALARM # LOADDUMP# WARNING# DESCRIPTION
55 311 567 HIGH OIL PRESSURE:
Set if the oil pressure value measured from the sender is
above the programmed limit. Warning and shutdown limits
are independently programmable. This fault will be
monitored
Holdoff Timer delay after the engine is running.
56 312 568 LOW COOLANT TEMPERATURE:
Set if the coolant temperature value measured from the
sender is below the programmed limit. Warning and
shutdown limits are independently programmable.
57 313 569 HIGH COOLANT TEMPERATURE:
Set if the coolant temperature value measured from the
sender is above the programmed limit. Warning and
shutdown limits are independently programmable.
58 314 570 LOW FUEL LEVEL:
Set if the fuel level value measured from the sender is
below the programmed limit. Warning and shutdown limits
are independently programmable.
59 315 571 HIGH FUEL LEVEL:
Set if the fuel level value measured from the sender is
above the programmed limit. Warning and shutdown limits
are independently programmable.
60 316 572 OIL SENDER OPEN:
Set if the resistor value read from the sender input is
above 5000 ohms or if the terminal is left open.
61 317 573 TEMPERATURE SENDER OPEN:
Set if the resistor value read from the sender input is
above 5000 ohms or if the terminal is left open.
62 318 574 FUEL LEVEL SENDER OPEN:
Set if the resistor value read from the sender input is
above 5000 ohms or if the terminal is left open.
63 319 575 LOW BATTERY VOLTAGE:
Set if the genset battery voltage is below programmed
limits. Shutdown and warning limits are independently
programmable. The detection delay is also programmable.
64 320 576 HIGH BATTERY VOLTAGE:
Set if the genset battery voltage is above programmed
limits. Shutdown and warning limits are independently
programmable. The detection delay is also programmable.
65 321 577 FAIL TO START:
Set if the engine is not running after programmed number
of start attempts.
66 322 578 FAIL TO STOP:
Set if the engine has not stopped before the expiration of
the
Stop Timer .
67 323 579 LOW CHARGE VOLTAGE:
Set if the charge alternator voltage is below the
programmed limit. This fault will be monitored with
Fault
Holdoff Timer delay after the engine is running.