DataDirect Networks EF2800, Руководство пользователя

Страница: 277 / 381

254
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
C r e a t i n g a n d M a n a g i n g A r r a y s & P a r t i t i o n s
D.3.8.3 Configuring InfoShield
Once you set up host nicknames, you can easily set up your InfoShield.
This is where you determine which hosts can access each partition
LUN.
You set up InfoShield by either excluding or including hosts on a list for
each partition LUN. The list can include or exclude up to 16 specific
hosts or all hosts for each partition LUN.
The InfoShield information is stored as part of the array’s metadata
using the WWN for each host. If you install a new SM, the array
partition’s InfoShield will remain. The InfoShield will also remain if you
change the partition’s LUN.
NOTE: Changes to InfoShield take effect immediately, therefore, you
should make changes that limit access to partitions when the partitions are
not in use.
To set up InfoShield:
1.
Bring up the Partition menu.
From the Array Menu:
- From the System Menu, select
Array Menu
and press <Enter>.
The Select Array screen displays with a list of existing arrays.
- Select the array you want and press <Enter>. The array menu
displays.
- Select
Partition Menu
and press <Enter>. The Select Partition
screen displays with a list of existing partitions for the current
array.
- Select the partition you want and press <Enter>. The Partition
menu displays
(Figure 135)
.
From the All Partition Menu:
- From the System Menu, select
All Partitions Menu
and press
<Enter>. The Select Partition or Free Area screen displays with
a list of existing partitions and free space.
- Select the partition you want and press <Enter>. The partition
menu displays
(Figure 135)
.