DataDirect Networks EF2800, Руководство пользователя

Страница: 221 / 381

198
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
A c c e s s i n g D i s k A r r a y A d m i n i s t r a t o r S o f t w a r e
To access the Disk Array Administrator software using the Ethernet
port and the Telnet utility:
4.
Set up the IP address and subnet mask as described in section
C.2.1 , "Set Up for First Time Use" on page 197 .
5.
At the DOS or UNIX prompt, type telnet and press <Enter>.
The exact steps for your Telnet program may be different. The
remaining steps work for HyperTerminal Private Edition.
6.
Using the
Terminal
menu, select
Preferences
.
7.
Select
VT100 Arrows
option,
VT-100/ANSI
emulation, and
Terminal
font
(Figure 79)
. Click
OK
.
If you are using Windows and Telnet, you must configure the
preferences and font from the Terminal menu each time as shown
below.
8.
Enter the IP address or, using the
Connect
menu, select the EF2800
IP address from the menu (if present) and press <Enter>.
If needed, enter the port number. The default port is 23.
9.
At the Enter Password screen. Enter your password and press
<Enter>. There is no default password. If you have not set up a
password, just press <Enter>.
The initial Disk Array Administrator screen appears
(Figure 80)
. If
any events have occurred, each event displays. Informational
events scroll by automatically. Warning events (yellow text on a
Click Font to set the
font as shown here.
Figure 79. Select Terminal Font