DataDirect Networks EF2800, Руководство пользователя

Страница: 248 / 381

C r e a t i n g a n d M a n a g i n g A r r a y s & P a r t i t i o n s
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
225
using a custom application, and therefore are not using CAPI, select NONE
as the CAPI LUN. This allows your first array to be seen at LUN 0.
The system warns you about the LUN for UNIX and Macintosh, as
above, the first time you create a partition. Press
Enter and the
system asks if you want to be warned again. Select No to avoid
receiving this warning again, otherwise select Yes to be warned the
next time you create a partition.
The system prompts you to confirm changes.
8.
Select
Yes
and press <Enter>.
D.2.4 Verifying an Array
The Verify function allows you to verify the data on the specified array
(RAID 3, RAID 4, RAID 5, RAID 50, and mirrored arrays only):
• RAID 3, RAID 4, RAID 5 and RAID 50 : Verifies all parity blocks in the
selected array and corrects any bad parity.
• Mirrored: Compares the primary and secondary drives. If a
mismatch occurs, the primary is copied to the secondary.
You may want to verify an array when you suspect there is a problem.
To verify an array:
1.
From the System Menu, select
Array Menu
and press <Enter>.
The Select Array screen displays with a list of existing arrays.
2.
Select the array you want and press <Enter>. The Array menu
displays.
3.
Select
Verify Function
and press <Enter>. The Verify menu displays
(Figure 108)
.