Datacom FVS-1044, Руководство пользователя, Страница: 86 / 90

Appendix 2 - Sample Filter Setup 86
© 2010 Datacom Systems Inc
VERSA
™
stream
6. Building a Filter — In this
example, the user will apply
IP Address filtering which
allow monitoring tools or
probes to see a limited
volume of traffic. Click the
Filter Management tab,
click the Advanced Wizard
tab and click the Yes
button to view options to
allow a custom filter to be
created with one or many
individual filter types.
This created filter will be a IPv4 IP
Address Filter, so click forward through
Next until the IPv4 IP Address
Filtering is seen and check Enable IPv4
IP Address Filtering . This will be an
Include Filter so packets that meet this
criteria will be forwarded excluding
VLAN tagged frames to the monitor
ports. [
note:
if the source data includes
VLAN tagged traffic, the box for 'Enable
Examination of VLAN encapsulated
frames for all VLAN tagged frames']
Click the
Add button. Click under Lower
IPv4 IP Address to enter IP
Address. And since this is to be a range, check Enable Source Range . Enter
IPv4 Upper Source IP Address. To include additional or subsequent ranges,
simply click the Add button and enter the additional parameters. When all
selections have been completed, click the Finish button.
And once when all
selections have been
completed, the rule set
can be opened up to
review the settings
that have just been
created.
Give the Custom Filter
Name a name and click
the Save button.