Datacom FVS-1044, Руководство пользователя, Страница: 55 / 90

55
© 2010 Datacom Systems Inc
FLOWcontrol™
VERSA
™
stream
7.2.2.3.4 IPv4 IP Address Wizard
The IPv4 IP Address Wizard enables the creation of a table of IPv4 IP Address
comparisons to be made against each incoming frame. Said entries can be made
using the procedures outlined below. The three buttons available within the IPv4
IP Address Filtering Configuration are:
The button is used to add table
entries from scratch.
The button is used to
remove entire table rows. This button
is only enabled when an entire row has
been highlighted.
The button is used to copy a
selected table and add the row to the
end of the currently entered table. The row type only is copied. Specific data is
required to be entered for a complete specification of a given filter row.
The
button is used to cancel ALL entered filter specifications and return to
the Filter Management Screen. The button takes all currently entered
data and populates the information in the Filter Specifics Panel with the
selected data entered in the applicable area on the screen.
The IPv4 IP Address filter being created is either an Include or an Exclude filter
as determined by selecting the
or the radio button. The two are
mutually exclusive. Selection of the Include Filter disables the Exclude Filter and
vice-versa. Individual IPv4 IP Address filter entries can now be made and when
all data entry is complete for the IPv4 IP Address Filter, click the
button.
To add entries to the IPv4 IP Address
filter table, select the
button,
which adds a row to the table with the
values specified as depicted.
A valid IPv4 IP Address entered in the
second column will enable the Rule
automatically.
If the IPv4 IP Address table
entry is supposed to be a
Source Range, enter data as
depicted.