Datacom FVS-1044, Руководство пользователя, Страница: 84 / 90

Appendix 2 - Sample Filter Setup 84
© 2010 Datacom Systems Inc
VERSA
™
stream
9 Appendix 2 - Sample Filter Setup
This section applies to all Datacom Systems filtered products. Although the
example is focused on the FVS-1080, it is intended to be a sample filter setup
as described in the section that follows to include:
1.
Initial Setup — IP Address
2.
FLOWcontrol™ — Agent > Add
3.
Agent > Connect
4.
Port Configuration
5.
Aggregation Configuration
6.
Building a Filter
7.
Applying a Filter
1. Initial Setup — IP Address — You need to configure your Filtered Product
with an IP address (factory default IP Address: 198.162.1.1; Subnet Mask:
255.255.255.0; Default Gateway: 0.0.0.0) that is appropriate for your local
network before making use of the FLOW
control ™ software. Details can be found
in the Filtered Product Hardware USERguide in the IP Address Configuration
section. In a nutshell, a Command Line Interface serial port connection using a
terminal emulator (9,600 bits per second; 8 data bits; Parity none; 1 stop bit;
Flow control none) [
note:
FSSes and FVS-1044 2,400 bits per second; FVS-1080
9,600 bits per second; all others 115,200 bits per second] is used to assign the
IP address.
for example,
set ip 10.1.53.28 255.255.255.0 10.1.1.240
2. FLOWcontrol™ — Agent > Add — Launch the FLOW control ™ application.
i.e.,
Start > Programs > Datacom Systems > FLOWcontrol_V2
You need to add the filtered product with the previously assigned Initial Setup
— IP Address to the Agent List.
i.e.,
Agent > Add
Fill in the Agent Properties with
Agent, Description, Location, IP Address, Port
(default 2370) and push Get Product. The Get
Product function communicates directly with the
filtered product and fills the product field. Click
the
Save button.
84
84
85
85
85
86
87
84