Datacom FVS-1044, Руководство пользователя, Страница: 31 / 90

31
© 2010 Datacom Systems Inc
FLOWcontrol™
VERSA
™
stream
7.2.1.1.2.5 Delete
Agent > Delete — menu selection will remove
an agent from the Agent List and from the
registry, where the definition for said agent
resides. A confirmation screen is presented
prior to allowing deletion to occur..
Selecting the button will accomplish the deletion, while selection of the
button will cancel the deletion.
7.2.1.1.2.6 Modify
Agent > Modify — menu selection will invoke the Agent Properties form as
noted in the Agent > Add, Modify Properties Form section of this document.
The Agent properties unique to the selected Agent will be populated into the
Agent Properties form for modification by the user.
7.2.1.1.2.7 Refresh
Agent > Refresh — clears the agent list and reloads it from the registry.
7.2.1.1.2.8 Restart
Agent > Restart — performs a warm boot and causes the agent to disconnect.
7.2.1.1.2.9 Agent > Add, Modify Properties Form
Agent > Add, Modify — is handled using an
Agent Properties form into which specific
information can be designated. The Agent
Properties form appears when Add or Modify
is selected from the Agent menu.
From this form the Agent, Location and
Connection can be managed. In addition, the
filtered product found at a specified
Connection can be determined. Selection of
the
button on the form attempts to
communicate and determine what filtered
product responds. Although this capability is
provided, an agent may be specified without
determining the product. Whenever an actual
connection is made to a specified agent, the product type and properties are
retrieved from the hardware and appropriate adjustments are made to the Agent
definition in the computer registry and on the Agent List. Each Agent defined is
stored in the local computer's registry.
All controls on the form are editable. As a result, if a new Agent is required,
enter the new agent name into the drop down box. Subsequent Agent additions
will build a list of agents found so that selection of a given Agent can be made
through the drop-down box. The same is true of the Location. The Agent and
Location Descriptions are free text used to specify unique characteristics for the
given Agent or Location. The Connection Type drop-down box is populated with
any local unused COM ports as well as populating the entry of "Network
Connectivity". Whenever Network Connectivity is selected, the IP Address and IP
31