Datacom FVS-1044, Руководство пользователя, Страница: 30 / 90

FLOWcontrol™ 30
© 2010 Datacom Systems Inc
VERSA
™
stream
Entry of a valid Username and Password will authenticate and subsequently
connect to the filtered product for which the agent was selected. During the
connection phase, the authentication of the entered Username and Password is
completed. If the authentication is valid, FLOW
control ™ requests information
from the filtered product regarding its product properties (i.e., supported media
types, tap ports, etc.). Based upon the properties, various FLOW
control
elements are loaded. These elements may vary from product to product. Once
the product elements are loaded, another tab page is added which corresponds
to the product selected. A front panel graphic is presented and a series of
subordinate tab pages are populated, also based on the product properties.
In FLOW control ™, it is possible to connect to multiple agents simultaneously.
However, when a connection has been established, the newly connected agent's
product tab is selected.
7.2.1.1.2.2 Disconnect
Agent > Disconnect — menu selection will perform the same functionality as
the File > Exit menu option. Please refer to that section to determine the
functionality.
7.2.1.1.2.3 Communications Console
Agent > Communications Console — will Open or Close a specified
Communications Console. A newly created Communications Console can be used
for either Telnet or Serial communications.
Additional information regarding the Communications Console can be found in
the section that follows.
7.2.1.1.2.4 Add
Agent > Add — menu selection will invoke the Agent Properties form as noted in
the Agent > Add, Modify Properties Form section of this document. A new
Agent can be added to the Agent List using this function.
28
59
31