Datacolor Conditioner Operation Manual / DCCOPMN_RP1 / Rev 3.0 / 7th August 07
page 39 of 51
8.2 Error
messages
During controller operation and when switching on the unit or changing the operating mode, error
messages can occur, which are caused by internal controller faults.
•
Visual display (examples):
LED
Upper display,
Lower display
flashes
flashes
flashes
flashes
•
Measures
1. Switch off the unit at the main switch.
2. Pull the power plug.
3. Wait 1 minute.
4. Plug in the mains plug again.
5. Switch on the unit at the main switch.
6. If the error message occurs again, the device might be faulty. Please contact your local Datacolor
service representative.
