DataCard CR805, Руководство пользователя

Страница: 79 / 136

CR805 Retransfer Card Printer User’s Guide 63
The Card Printer Driver does not detect the network-
connected printer
The Card Printer Driver does not detect the USB-connected
printer
Problem Solution
The Printer Properties >
Status tab shows the
printer is not available. Make sure that you use the same type of data cable—USB or
network—that was used when the printer was installed. You
cannot switch the type of data cable after installation.
Make sure that the current printer IP address is the same as
the IP address on the Printer Properties > Ports tab. For more
information about retrieving the printer’s IP address, refer to
“Retrieve the Printer’s Network IP Address” on page 23 .
Message 500 displays
after you send a card to
print. If this happens often, consider switching from DHCP network
addressing to static IP addressing. For more information about
setting the Card Printer Driver network communication value,
refer to the “Printer Manager” section of the card printer’s
Installation and Administrator’s Guide.
The network is not
operating properly. Test the network using another device and fix or report
network problems. To test the network, print to a different
(paper) printer or verify the availability of network drives.
The printer is not
connected to the
network, or the PC is
not connected to the
network. Make sure that both ends of the data cable are connected.
Replace defective cables if needed.
Problem Solution
The Printer Properties >
Status tab shows the
printer is available, but
Message 500 displays
after you send a card to
print. Make sure that you use the same type of data cable—USB or
network—that was used when the printer was installed. You
cannot switch the type of data cable after installation.
Make sure that both ends of the data cable are connected.
Replace a defective USB cable if needed.