Shimadzu GC-201x
4 Using the control module
Zero at ready
When checked, the chromatograph performs the autozero action after it
becomes
READY
.
Auto flame ON
When checked, the chromatograph will try to ignite the flame in the
detector after sufficient temperature and gasses pressure was reached.
Re-ignite
While checked, the chromatograph will try to re-ignite the flame in the
detector when it is quenched. This may be important during the start of the
chromatograph as the auto ignition may not be successful on the first try.
4.2.9 Method Setup - GC - Gradients
Fig 17: Method Setup - GC - Gradients
This tab displays the temperature gradient as set on the
Method Setup -
GC - Oven/Zones
tab.
- 21 -
