4 Using the control module
Clarity Controls
Column i.d.
Sets the inner diameter of the column.
Column length
Sets the length of the column.
Film thickness
Sets the thickness of the column inner coating.
Flow Control Mode
Selects the flow control mode for the inlet.
Inlet Pressure
Sets the gas pressure for the inlet.
Column Flow
Sets the flow for the inlet.
Linear Velocity
Sets the linear velocity of gas for the inlet. This value is linked with two
preceding values (
Inlet Pressure
and
Column Flow
) by mutual
recalculation performed by chromatograph itself. Thus it is possible to
enter only one of them, the others will be calculated by chromatograph
and can be downloaded using
From GC
button.
Split Ratio
Sets the split ratio for split operation. Available for
SPL
inlet only.
Total Flow
Sets the total flow for the inlet.
Carrier Gas
Sets the type of gas used as the carrier.
Purge Flow
Sets the purge flow for the inlet. Available for
SPL
inlet only.
- 10 -
