4 Using the control module
Clarity Controls
4.5 Shimadzu GC-201x Setup
Dialog tabs:
Connection
-
Piping
-
Signals
-
Heater Ports
-
Line Config
Shimadzu GC- 201x Setup
dialog (accessible through the
System
Configuration
dialog) allows to view and manually set the hardware
configuration of the chromatograph. All fields (with the exception of
Name
field and the
Signals
tab) can be read from the chromatograph by using
the
Autodetect
button.
Caution:
It is highly recommended not to change any data read from the
chromatograph by the
Autodetect
function, because these settings are
checked against those in the GC when opening the
Instrument
window. If
they don't match, the control is not possible. The only parts of the dialog
that can be modified without risk is the
Name
parameter on the
Connection
tab and any data on the
Signals
tab.
Connection tab
Fig 20: Shimadzu GC-201x Setup - Connection
Main page of the
Shimadzu GC-201x Setup
dialog.
Port
Selects the COM port to which the
Shimadzu GC-201x
chromatograph is
connected.
Baud Rate
Sets the baud rate of the communication. For a chromatograph directly
connected to the PC via short cable it is recommended to set the
Baud
Rate
to
115200
, for the chromatograph connected by long serial cable or
through LAN it will be necessary to set the
Baud Rate
lower. Default value
is
115200
.
Caution:
The baud rate set in this dialog must correspond to the baud rate value set
in the chromatograph.
- 24 -
