Agilent 7890
4 Using the control module
4 Using the control module
New
GC
tab appears in the
Method Setup
dialog, enabling the setting of
the GC control method. With an automatic sampler configured,
AS
tab also
appears, allowing the setting of the autosampler method.
4.1 Hardware Configuration
Fig 4: Hardware Configuration
This dialog is invoked by pressing the
GC Status
button in the
Method
Setup - GC
dialog.
Hardware Configuration
dialog displays the type of the
chromatograph, it's serial number and the IP address and port to which it
is connected.
- 8 -
