48
12048231 Rev. 00 (Draft)
DATA MODUL AG | www.data-modul.com
4.21. V-By-One Display Connector
Reference Designator: J32
JAE FI-RE51S-HF connector with 51 positions, shielded, right-angled
Description
V-By-One connector supporting next generation flat panels with graphics resolution up to 4k (2160p).
Interfaces used
DP1 port from SMARC module over DisplayPort to Vx1 Bridge Novatek NT68410UBG.
Display Power Supply: V_TCON_5V_10V_12V can be selected through Jumper J60 between 5V/10V/12V.
The maximum current of 4.0A can be continuously sourced. Short overload up to 5A for Display test-mode is
allowed.
The overcurrent protection is by set eFuse to 5.3A
Display Power Supply
The VDD (V-TCON) power supply is
default
selected to VCC 12.0V (S0) by J60.
Attention! The V-By-One panel-
power can only be supplied either through the “V-By-One Displayconnector” J32 or
the “V-By-One Display-Power-connector” J56
Connector drawing and contact-numbering scheme
Figure 30 Connector
– J32
Pinout according to Data Modul Inhouse-Standard DMIS12
J32
Pin
Signal / Function
Pin Type
Signal Description
1
GND
GND
V-By-One HS CML ground
2
VX1_TX7_P
O DP (CML)
V-By-One HS lane 7 (CML), positive pin
3
VX1_TX7_N
O DP (CML)
V-By-One HS lane 7 (CML), negative pin
4
GND
GND
V-By-One HS CML ground
5
VX1_TX6_P
O DP (CML)
V-By-One HS lane 6 (CML), positive pin
6
VX1_TX6_N
O DP (CML)
V-By-One HS lane 6 (CML), negative pin
7
GND
GND
V-By-One HS CML ground
8
VX1_TX5_P
O DP (CML)
V-By-One HS lane 5 (CML), positive pin
9
VX1_TX5_N
O DP (CML)
V-By-One HS lane 5 (CML), negative pin
10
GND
GND
V-By-One HS CML ground
11
VX1_TX4_P
O DP (CML)
V-By-One HS lane (CML), positive pin
12
VX1_TX4_N
O DP (CML)
V-By-One HS lane 4 (CML), negative pin
13
GND
GND
V-By-One HS CML ground
