Data Industrial Series 340 Btu transmitter Owner’s Manual
5
Programming
Programming the Series 340 is accomplished by installing the Data Industrial programming software on
a computer and entering data on templates of the Windows
®
based program.
1. Load the interface software into the computer.
2. Connect the computer to the Series 340 transmitter with the Data Industrial A-301 communications
cable to the socket labeled “D.I.C Comm Port”, taking care to properly align the tab on the plug and
socket to maintain polarity. Connect the DB9 connector of the Data Industrial A301 communications
cable to a PC com port that has the 340 software installed.
3. Connect the Series 340 transmitter to a power supply.
4. Open the interface software and select the appropriate COM PORT as shown in the dialog box
below.
5. Open the Parameters Screen as shown below.
To go to the calibration
settings screen select
“parameters” from either
place shown
