DARE!! Products B.V. – Product Manual Page | 6
The RadiGen
®
Series
Description and capabilities
The RadiGen
®
RF signal generator is available in two models.
•
RGN2400A
•
RGN2006A
By offering a broad frequency spectrum, the RadiGen® is the perfect solution for conducted and
radiated immunity test applications.
RadiGen® RGN2400A – Single output
•
LF Output
- Signal generation from 9 kHz up to 400 MHz.
Suitable for conducted immunity measurements.
RadiGen® RGN2006A - Dual output
The RadiGen® model RGN2006A has two independent outputs which eliminates the need of an
external RF relay
•
HF Output
– Signal generation from 9 kHz up to 6 GHz.
Suitable for radiated immunity measurements.
•
LF Output
- Signal generation from 9 kHz up to 400 MHz.
Suitable for conducted immunity measurements.
Accuracy
The RadiGen
®
RF signal generator has a frequency error of less than 10 ppm/year. For higher
frequency accuracy, the RadiGen® can be used in combination with an external frequency
reference standard. The LF-signal generator and modulators are fully digital, eliminating any drift
in the modulation accuracy.
10 MHz frequency reference output
The RadiGen
®
has a 10 MHz frequency reference output which is available as a BNC connector.
This output can be used to synchronize other T&M devices.
10 MHz frequency reference input
Beside this, it has a frequency reference BNC input connector for synchronization using an external
10 MHz frequency reference.
Reliability
Defects to the output attenuator and RF switches are eliminated due to the fully solid-state design
of the RadiGen
®
, which results in a better Mean Time Between Failures (MTBF).
1
For example: one output can be connected to a conducted immunity setup while the other output
can be connected to a radiated immunity test setup.
Please note only one output can be used
at the same time.
