DARE!! Products B.V. – Product Manual Page | 21
Carrier frequency commands
Command
Description & Reply
[:SOURce]:FREQuency?
Requests the carrier frequency of the selected
output
For example: ‘:FREQ 125000000’
[:SOURce]:FREQuency<space><value>
Sets the carrier frequency of the selected output
<value> = frequency (in Hz),
RGN2400A:
LF Output: 9 kHz – 400 MHz
HF Output: Not available
RGN2006A:
LF Output: 9 kHz – 400 MHz
HF Output: 9 kHz – 6 GHz
Value can also be set with step size:
‘UP’ = Increase frequency with step size
‘DOWN’ = Decrease frequency with step size
[:SOURce]:FREQuency:STARt?
Requests the start frequency
[:SOURce]:FREQuency:STARt<space><value>
Sets the start frequency which should be defined
within the range of the selected output
<value> = start frequency (in Hz),
for example: 80000000
[:SOURce]:FREQuency:STOP?
Requests the stop frequency
[:SOURce]:FREQuency:STOP<space><value>
Sets the stop frequency which should be defined
within the range of the selected output
<value> = stop frequency (in Hz),
for example: 4200000000
[:SOURce]:FREQuency:STEP?
Requests the step size of the carrier frequency (in
Hz)
For example: ‘:FREQ:STEP 10000000’
[:SOURce]:FREQuency:STEP<space><value>
Sets the step size of the carrier frequency
<value> = frequency step size (in Hz)
For example: 1000
[:SOURce]:FREQuency:MINimum?
Requests the minimum carrier frequency
[:SOURce]:FREQuency:MAXimum?
Requests the maximum carrier frequency
[:SOURce]:FREQuency:STEP:MINimum?
Requests the minimum step size of the carrier
frequency
For example: ‘:FREQ:STEP:MIN 1’
[:SOURce]:FREQuency:STEP:MAXimum?
Requests the maximum step size of the carrier
frequency
For example: ‘:FREQ:STEP:MAX 1000000000’
