DARE!! Products B.V. – Product Manual Page | 15
No.
Usage
1
Frequency:
| The frequency button is used to set the desired carrier frequency of the RadiGen®.
When selected it will pop-up another screen. The new screen shows a numpad and some other
options, which will be explained further on page 15 of this manual).
2
Level |
The level button defines the carrier output amplitude of the RadiGen® signal generator. This
can be set in the same way as the frequency button.
3
Carrier |
The carrier can be selected (toggled) between:
-
On – Carrier signal is generated
-
Off – No carrier signal is being generated
Toggling of the carrier signal can be achieved by tapping the carrier button.
4
Down/up |
Under Frequency and Level there are four buttons. Two stating down and two stating up.
The ‘down’ and ‘up’ buttons can be selected to quickly change the frequency or level without the use
of the numpad. The step size can be set in the frequency and level menu and is displayed in the right
corner of the frequency and level buttons.
5
Modulation type
| The button modulation type can be tapped to change the modulation type from
AM to FM or the other way around. Make sure that when one of the types is selected the other signal
is turned OFF.
6
Pulse On time
| The pulse on time button is used to define the duration time for which the pulse is
active. The pulse can be turned off by pressing point 14 Pulse.
7
Pulse count |
The pulse count is the amount of pulses used within the specified time frame.
8
LF output
| This button needs to be selected if you want to make use of the Low frequency (LF) output
of the RadiGen® RGN2006A instead of the High Frequency (HF) output . Only one of these settings
works at the time, therefore in this picture only HF output is in use.
9
HF output
| when this button is selected (as shown in the picture) the Full band / High frequency
range is operational and ready for use. Note that only one of the HF or LF outputs can be active at the
same time.
10
Frequency |
This frequency is specifically for the modulation of the generated signal. This can be
changed to modify the modulation of the current selected frequency and type of modulation (AM or
FM).
11
Depth |
The Depth button shows the depth of the modulation of the AM signal which can be used to
change to depth of the modulation, when selected.
12
State
| - The State button shows if the modulation is ‘On’ or ‘Off’ and can be used to activate the AM
or FM modulation.
13
Pulse OFF time
| This shows the duration the pulse is OFF which can be changed to longer or shorter
and turned off by selecting the Pulse button shown at number 14.
14
Pulse
| Turns the Pulse On or Off by tapping it.
15
Gating pulse |
States (and can change) the pulse gating period of the duration in which the pulses are
generated.
16
Pulse Gating
| The button which can be selected to turn the pulse gating On or Off.
17
Show Smart
| Pressing this button will show the active settings and display readings of the
instruments that are active in the other slots of the RadiCentre® modular test system.
