26
2.0 Getting Started
2.9 Setting Up Link One for Read-
ing 1D Laser Barcodes
To use the scanning function, complete the following steps:
1. If not already removed, remove the protective plastic film from the
barcode reader.
2. Navigate to:
Start Menu > All Programs
2. Tap on the
Freefloat Link One
folder.
3. Double-tap on the
Link One
icon. If Link*One is already active, a
small square will be located in the
Task Bar
at the bottom of the
window.
2.7 Setting Up Wireless LAN
The Summit Client Utility (SCU) is an application designed for end us-
ers and administrators of mobile devices that use a Summit radio mod-
ule. For more information about or to initialize SCU, see
6.0 Summit
Client Utility
.
2.8 Using the 1D Barcode Scanner
1. Launch the data capture application.
2. Aim the 1D Barcode Scanner at the barcode.
3. Press the trigger and the laser reader will activate.
4. Pass the laser reader over the bar code as shown as
Correct Scan
below:
5. When the laser reader accepts the code, a tone will sound, the reader
will deactivate, and the data will appear in the target window of the
application.
6. If the scan is performed incorrectly, as shown below:
or the bar code is otherwise unreadable by the scanner, the laser read-
er will remain active for 10 seconds and no tone will sound. At 10
seconds, the laser scanner automatically deactivates and no data will
have been accepted or entered.
Correct Scan:
Incorrect Scans: