6
Product description
: Overall description
Product description
Overall description
HCC 260/360 residential ventilation unit is designed to supply fresh air to residential home, by
exchanging heat from outgoing air to incoming air, resulting in low heat energy loss.
These units are designed for installation underneath a ceiling, in dry surroundings, with tem-
peratures >12°C. e.g. utility room or similar heated rooms.
The duct connections can be electronically swapped, providing ability to route the connected
ducts, either to the right or to the left, as described on page 15
This illustrates the unit, without the steel drip tray:
1
13
14
15
2
3
5
6
7
9
8
11
12
10
4
Fig. 1
This table shows the parts according above illustration:
Pos
Mode A(default)
Mode B
1
Extract filter ISO Coarse
Supply filter ISO Coarse or ePM1
2
Bypass module
3
USB connection
4
Filter reset button
5
Controller PCB (external connections see page 21)
6
Supply filter ISO Coarse or ePM1
Extract filter ISO Coarse
7
Extract air - T3
Outside air - T1
8
Blocked
Water drainage spigot
9
Supply air - T2
Exhaust air-T4
10
Outside air - T1
Extract air - T3
11
Water drainage spigot
Blocked
12
Exhaust air – T4
Supply air - T2
13
Supply fan
Extract fan
14
Heat exchanger
15
Extract fan
Supply fan
Introduction
Product illustration
Part description
