Dantherm 3500, Руководство по установке

Страница: 7 / 36

7
EN
Included in the package
Description Number Please note
Indoor unit 1 -
Wall bracket, indoor unit 1 -
Outdoor unit 1 Incl. refrigerant R134a, 1100 gram.
Communication cable 10m Installed at outdoor unit. Fit with
connector for indoor unit.
Power supply cable, 2 x 4mm
2
9m Installed at outdoor unit. Flying leads
at opposite end.
Alarm connector 9 pin for Controller 1
Flarenut for 3/8” copper tube indoor unit 1
Flarenut for 1/2” copper tube indoor unit 1
Flarenut for 3/8” copper tube outdoor unit 1
Flarenut for 1/2” copper tube outdoor unit 1
Drainage hose for indoor drain pan 3m 1/2” Reinforced plastic.
Clamp for drainage hose 1
Manual 1 Part number: 095106
Parts needed for installation There might be need for further installations parts whicha are not supplied with the Dantherm
DC Split Air Condition 3500.
•
Any screws for mounting indoor and outdoor unit
• Ø85mm plastic sleeve for wall hole
• Sealant for wall hole
• Wall bracket for outdoor unit
Required tools
For installation
To perform a proper installation you need the following tools before starting the installation.
•
Level gauge
• Electric Drill
• Suitable drill according to the wall type
• Hole core drill Ø85mm
• Screw driver for Torx
• 2 adjustable wrench
• Refrigerant gas leak detector
• Nitrogen for drying the cooling system
• Wacuum pump
Installation