Dantherm 3500, Руководство по установке

Страница: 14 / 36

14
EN
Cables and flares Put the the two cables through the hole in the wall.
Next pull the cooling pipes and drainage from inside through the hole in the wall.
Do not bend or block the drain hose.
Be careful not to make a sharp bend at the refrigerant pipes.
Connect the flares from the hoses to the service valves.
Tighten the flare nut carefully first by hand and afterwards use the wrench to tighten up.
Installation of indoor, outdoor unit, continued
½" - 20 UNF