needed.
-Resolution:
Select the frame rate for each camera by HD or VGA
Frame rate:
Cam x 2 : 720p x1 @ 15 fps or Cam x 2 : VGA x2 @ 30 fps or Cam x 4 : VGA x 4 @ 15 fps
6 Scan mode
In Scan mode, the receiver’s LCD screen and speaker will turn off unless motion is detected by one of
the cameras. The LCD screen turns on and displays video from the camera where motion was detected
for 15 seconds before turning off again. This conserves battery power and alerts you only when needed.
You can configure how much motion is needed to turn the display on in Scan mode by changing a
camera’s video motion detection settings.
To enable Scan mode:
1. Enter live viewing mode.
2. Press the
power button
on top of the receiver.
3. Press the
power button
again to exit Scan mode.
6. Android and iOS App Remote view
Use the free MyCam View app to conveniently connect to your system on a smartphone /
tablet. The mobile app is free with no recurring fees. View live video from the camera(s)
from anywhere with an Internet connection.
6.1 System Requirements
•
You must have a high-speed Internet connection to view live video using the mobile app.
Traffic congestion may result in choppy video.
•
When using a mobile cellular network, data charges may apply. Check with your provider
for details.
6.2 MyCam View for Android Devices
Getting Started: Use the following instructions to view your camera(s) over the Internet
using your Android
™
smartphone or tablet.
1. Connect the included Ethernet cable from the Ethernet port on the LCD receiver to
your wireless router. The network icon on the receiver turns green (
).
•
You may need to turn the receiver off and on again for it to connect to your network.
2. Connect to your home WiFi Internet using your Android
™
smartphone or tablet.
