navigate to parts of the video that are outside the range of screen. Press zoom again to exit zoom mode.
8 Overwrite Indicator
–Indicates Overwrite mode is on, which means the system will overwrite the
oldest recordings when the memory card is full. When you choose the overwrite function, the indicator
will be shown on the LCD screen
9 New Record Indicator
- Indicates that there are new recordings saved to the microSD card.
10 Battery Indicator-
Indicates the battery life of LCD monitor in low battery will show red and the
green LED under the indicator light will flash.
11 Time stamp-
The current date and time on the system(month/date/year, hour/minute/second)
12 Motion recording indicator-
Indicates that motion recording is turned on.
13 Volume indicator
-Shows the current volume of the receiver. You must be in single channel
viewing mode to change volume,
indicate the volume 0.
14 New download icon-
appears on the screen if new firmware is available.
2 Viewing Modes
There are four different viewing modes available on the system: single channel viewing, Auto Sequence
Viewing mode (view individual channels automatically in sequence), Quad
mode, and Scan mode.
Note:
Auto Sequence Viewing mode cycles through connected channels in full-screen.
Use Quad mode to view up to four cameras simultaneously.
Use Scan mode, the receiver’s LCD screen and speaker will turn off unless motion is detected by one of
the cameras. The LCD screen turns on and displays video from the camera where motion was detected
for 15 seconds before turning off again. This conserves battery power and alerts you only when needed.
You can configure how much motion is needed to turn the display on in Scan mode by changing a
camera’s video motion detection settings. When exiting Scan mode, the receiver resumes live viewing in
Auto Sequence Viewing mode.
To change viewing modes:
Press
view
to select between Quad mode (half-Quad mode when only 2 cameras are connected)
and Auto Sequence viewing mode. OR Press
change channel icon
to switch between channels 1~4 in
single channel view.
