Quad mode half- Quad mode
Note:
When you only pair a camera or set one camera on(other three is off), there is no access to see
QUAD mode.
3 micro SD Card Recording
The system records video to the micro SD card (not included). You can manually record the video at your
desire or the receiver records when there is motion detected by the cameras and under the A/REC
function, or schedule recording based on the scheduled you set for each camera. Before recording, you
need to insert a micro SD card to the micro SD card slot. The system can support up to 64GB micro SD
card.
Recording Prerequisites:
A micro SD card must be inserted into the receiver in order to record video.
You should always format the micro SD card prior to initial recording.
The following recording modes are available on the system: manual recording, schedule recording, and
motion recording. Record up to 4 channels at the same time.
3.1
Motion Recording
System only records when motion is detected by a camera(s).Press
Motion
on the front panel of the
receiver to start motion recording. There is a
on the bottom right of corner. In this mode the
receiver starts recording prior to 5 seconds when motion detected by any activated camera. The
recording time can be set to 15s,30s or 1minitus after last detection. (Receiver support recording 4
camera at the same time in quad mode)
Press
Motion
again or press
Rec
to stop recording, after stopping recording press
Motion
to cancel
automatic recording mode.
3.2 Manual Recording
Press
Record
on the front panel of the receiver to starts manual recording. Press the key again to
stop manual recording.
Note:
In Quad view,it can continuous record from up to 4 cameras at a time
.
3.3 Schedule Recording
Continuous or motion event recording from up to four cameras according to a weekly schedule . Set the
recording start time and end time, then switch on schedule recording in the menu to enable schedule
recording. In this mode the receiver records at a certain time every day.
