Danfoss WS103, Руководство пользователя

Страница: 6 / 60

WS103 remote solution
The WS103 interface is designed to provide wireless access to the CAN data of a vehicle, machine, or
system via WLAN / Bluetooth
® .
The WS103 is a stand-alone multiradio module which includes Wi-Fi, Classic Bluetooth ® and Bluetooth ®
Low Energy (planned). The Wi-Fi support conforms to IEEE 802.11a/b/g/n, and has support for dual-band
2.4 GHz and 5 GHz operation.
The module can be used as CAN-WLAN / Bluetooth ® interface or wireless CAN-CAN bridge. In a CAN-
WLAN / Bluetooth ® interface, the module is used for transmission of CAN data to other WLAN /
Bluetooth ® / network devices, such as computers, smartphones, or tablets on which the CAN data can be
managed and evaluated. The data exchange is bidirectional when the device is configured as a WLAN /
Bluetooth
® interface via software.
In a wireless CAN-CAN bridge, CAN data is transmitted wireless between two WS103 modules. The CAN-
CAN bridge serves as a replacement for a CAN cable for more efficient and dependable communication
of operational data over long runs and moving joints.
The interface is suitable for use in mobile and stationary systems for industrial, agricultural, and forestry
machinery.
The WS103 is an Easy-to-Install plastic enclosure which can be bolted to a panel.
OEM responsibility
The OEM of a machine or vehicle in which Danfoss products are installed has the full responsibility for all
consequences that might occur. Danfoss has no responsibility for any consequences, direct or indirect,
caused by failures or malfunctions.
•
Danfoss has no responsibility for any accidents caused by incorrectly mounted or maintained
equipment.
•
Danfoss does not assume any responsibility for Danfoss products being incorrectly applied or the
system being programmed in a manner that jeopardizes safety.
•
All safety critical systems shall include an emergency stop to switch off the main supply voltage for
the outputs of the electronic control system. All safety critical components shall be installed in such a
way that the main supply voltage can be switched off at any time. The emergency stop must be easily
accessible to the operator.
User Manual
WS103 Remote Solution
Overview
6 | © Danfoss | July 2016 AN00000339en-US0101