Danfoss VLT MCD 600, Руководство по эксплуатации, Страница: 97 / 140

Table 103: 5-6 - Overcurrent Delay
Range Function
* 0 s 0:00–1:00 (minutes:seconds) Slows the soft starter's response to overcurrent, avoiding trips due to momentary overcur-
rent events.
Table 104: 5-7 - Undervoltage
Range Function
*350 100–1200 V Sets the trip point for undervoltage protection. Set as required.
N O T I C E
Voltage protection does not operate correctly until the soft starter is in Run mode.
Table 105: 5-8 - Undervoltage Delay
Range Function
* 1 s 0:01–1:00 (minutes:seconds) Slows the soft starter's response to undervoltage, avoiding trips due to momentary fluctua-
tions.
Table 106: 5-9 - Overvoltage
Range Function
*500 100–1500 V Sets the trip point for overvoltage protection. Set as required.
Table 107: 5-10 - Overvoltage Delay
Range Function
* 1 s 0:01–1:00 (minutes:seconds) Slows the soft starter's response to overvoltage, avoiding trips due to momentary fluctua-
tions.
Table 108: 5-11 - Underpower
Range Function
*10% 10–120% Sets the trip point for underpower protection. Set as required.
Table 109: 5-12 - Underpower Delay
Range Function
*1 s 0:01–1:00 (minutes:seconds) Slows the soft starter's response to underpower, avoiding trips due to momentary fluctua-
tions.
Table 110: 5-13 - Overpower
Range Function
*150% 80–200% Sets the trip point for overpower protection. Set as required.
Table 111: 5-14 - Overpower Delay
Range Function
* 1 s 0:01–1:00 (minutes:seconds) Slows the soft starter's response to overpower, avoiding trips due to momentary fluctua-
tions.
AQ262141844215en-000401 / 175R1174 | 93 Danfoss A/S © 2020.12
Programmable Parameters
VLT® Soft Starter MCD 600
Operating Guide