manualshive.com logo in svg

Danfoss VLT MCD 600, Руководство по эксплуатации, Страница: 54 / 140

Поделиться
Скачать
Danfoss VLT MCD 600 Скачать руководство пользователя страница 54

•
•
•
•

1.
2.
3.

4.
5.
6.

6.7 USB Save & Load

The 

USB Save & Load

 menu allows:

Saving parameter settings and all event log entries to an external file (CSV format).
Saving parameter settings to an external file (proprietary format).
Loading parameter settings from a previously saved external file.
Loading custom messages to show on the LCP when a programmable input is active.

N O T I C E

The VLT® Soft Starter MCD 600 supports FAT32 file systems. The MCD 600 USB functions are not compatible with NTFS file sys-
tems.

6.7.1 Save and Load Procedure

Procedure

Connect the external drive to the USB port.
Press [Menu/Store] and select 

Setup Tools

.

Scroll to 

USB Save & Load

 and press [Menu/Store].

e

7

7

h

a

7

3

3

.1

0

 

USB Save & Load

Save Params and Logs

Save Master Params

Load Master Params

Scroll to the required function and press [Menu/Store].
At the confirmation prompt, select 

Yes

 to confirm or 

No

 to cancel.

Press [Menu/Store] to proceed.

When the action has been completed, the screen briefly shows a confirmation message, then returns to the previous menu level.

6.7.2 File Locations and Formats

Save parameters and logs

The soft starter creates a directory at the top level of the USB drive, named with the soft starter serial number. The event log and
parameter settings are saved as individual CSV files, and the soft starter's software and system information are saved to a text file.

Save master parameters

The soft starter creates a file called Master_Parameters.par in the top level of the USB drive.

Load master parameters

The soft starter loads the file Master_Parameters.par from the top level of the USB drive. The file can be created or edited using VLT®
Motion Control Tool MCT 10. Download the MCT 10 tool from 

www.danfoss.com

 under the sections 

Service and support/Downloads

.

Load custom message

The soft starter loads the files Custom_Message_A.txt and Custom_Message_B.txt from the top level of the USB drive.

AQ262141844215en-000401 / 175R1174

50 | Danfoss A/S © 2020.12

Set-up Tools

VLT® Soft Starter MCD 600

Operating Guide

Содержание VLT MCD 600













































































































































Отзывы:

Нет отзывов