Danfoss vlt fcd 302, Руководство по эксплуатации, Страница: 35 / 84

•
Each display read-out has a parameter associated
with it.
•
The frequency converter status at the bottom line
of the display is generated automatically and is
not selectable. See
chapter 6.3 Status Message
Definitions for more information.
Display Parameter number Default setting
1.1 0-20 Motor RPMs
1.2 0-21 Motor current
1.3 0-22 Motor power (kW)
2 0-23 Motor frequency
3 0-24 Reference in percent
Table 4.1 LCP Display Values
130BC363.10
1.1
3
1.3
799 RPM
Auto Remote Ramping
1 (1)
0.75 kW 0.98 A
0.000
53.2 %
Status
1.2
2
Illustration 4.2 LCP Display Values
1.2
2
207RPM
Auto Remote Running
1 (1)
0.75 kW
0.98 A
6.9
Hz
Status
130BC364.10
1.1
1.3
Illustration 4.3 LCP Display Values
4.1.3 Display Menu Keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
130BP045.10
Status
Quick
Menu
Main
Menu
Alarm
Log
Illustration 4.4 Menu Keys
Key Function
Status Shows operational information.
•
In Auto mode, press to toggle between
status readout displays.
•
Press repeatedly to scroll through each
status display.
•
Press [Status] plus [
▲
] or [
▼
] to adjust the
display brightness.
•
The symbol in the upper right corner of the
display shows the direction of motor
rotation and which set-up is active. This is
not programmable.
Quick Menu Allows access to programming parameters for
initial set-up instructions and many detailed
application instructions.
•
Press to access Q2 Quick Set-up for
sequenced instructions to program the basic
frequency controller set-up.
•
Follow the sequence of parameters as
presented for the function set-up.
Main Menu Allows access to all programming parameters.
•
Press twice to access top-level index.
•
Press once to return to the last location
accessed.
•
Press to enter a parameter number for direct
access to that parameter.
Alarm Log
Displays a list of current warnings, the last 10
alarms, and the maintenance log.
•
For details about the frequency converter
before it entered the alarm mode, select the
alarm number using the navigation keys
and press [OK].
Table 4.2 Function Description Menu Keys
User Interface Operating Guide
MG04F402 Danfoss A/S © 05/2016 All rights reserved. 33
4 4