manualshive.com logo in svg

Danfoss VLT FC 103, Руководство по эксплуатации

Поделиться
Скачать
Danfoss VLT FC 103 Скачать руководство пользователя страница 12

-

-

-

-

-

-

W A R N I N G

ROTATING SHAFTS

Contact with rotating shafts and electrical equipment can result in death or serious injury.

Ensure that only trained and qualified personnel perform installation, start-up, and maintenance.
Ensure that electrical work conforms to national and local electrical codes.
Follow the procedures in this guide.

C A U T I O N

HOT SURFACES

The drive contains metal components that are still hot even after the drive has been powered off. Failure to observe the high
temperature symbol (yellow triangle) on the drive can result in serious burns.

Be aware that internal components, such as busbars, may be extremely hot even after the drive has been powered off.
Do not touch exterior areas that are marked by the high temperature symbol (yellow triangle). These areas are hot while the
drive is in use and immediately after being powered off.

C A U T I O N

INTERNAL FAILURE HAZARD

An internal failure in the drive can result in serious injury when the drive is not properly closed.

Ensure that all safety covers are in place and securely fastened before applying power.

AQ357954340588en-000201 / 130R0881

12 | Danfoss A/S © 2020.09

Safety

VLT® Refrigeration Drive FC 103

Operating Guide

Содержание VLT FC 103























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды