Danfoss VLT DSD 510 Скачать руководство пользователя страница 221

Страница: 221 / 226

VLT Servo Drive Systems Glossary

A-flange

The A side is the shaft side of the servomotor.

ACM

Auxiliary Capacitors Module.

Ambient temperature

The temperature in the immediate vicinity of the servo system or compo-
nent.

Automation Studio

™

Automation Studio

™

is a registered trademark of B&R. It is the integrated

software development environment for B&R controllers.

Axial force

The force in newton acting on the rotor axis in the axial direction.

B side

The rear side of the servo drive with the plug-and-socket connectors.

B&R

Multi-national company, specializing in factory and process automation
software and systems for a wide range of industrial applications.

Bearings

The ball bearings of the servomotor.

Beckhoff

Beckhoff

is a registered trademark of and licensed by Beckhoff Automation

GmbH, Germany.

Brake

Mechanical holding brake on the servo drive.

CANopen

CANopen

is a registered community trademark of CAN in Automation e.V.

European test and certification mark.

CIA DS 402

Device profile for drives and motion control. CIA

is a registered community

trademark of CAN in Automation e.V.

Clamping set

A mechanical device, which, for example, can be used to secure gears to a
motor shaft.

Connector (M23)

Servo drive hybrid connector.

Cooling

Decentral servo drives are cooled by natural convection (without fans). All
system modules except the DAM 510, ACM 510, and EXM 510 are cooled by
an internal fan.

DAM

Decentral Access Module

DC voltage

A direct constant voltage.

DC-link

Each servo drive has its own DC-link, consisting of capacitors.

DC-link voltage

A DC voltage shared by several servo drives connected in parallel.

DSD

Decentral Servo Drive

EPSG

Ethernet POWERLINK

Standardization Group.

ETG

EtherCAT

Technology Group

EtherCAT

EtherCAT

(Ethernet for Control Automation Technology) is an open high-

performance Ethernet-based fieldbus system. EtherCAT

is registered trade-

mark and patented technology, licensed by Beckhoff Automation GmbH,
Germany.

AQ262449648484en-000101/175R1135 | 221

Glossary

VLT® Servo Drive System ISD 510/DSD 510

Operating Guide

Содержание VLT DSD 510



































































































































































































































Результаты поиска

Содержание VLT DSD 510

Отзывы:

Danfoss VLT DSD 510, Руководство по эксплуатации, Страница: 221 / 226

Результаты поиска

Содержание VLT DSD 510

Отзывы: