5.3 Ordering Numbers
5.3.1 Options and Accessories
Description
Enclosure type
1)
Mains voltage T4 (380-480 V AC)
MH1
[kW/Hp]
MH2
[kW/Hp]
MH3
[kW/Hp]
0.55-1.5/
0.75-2
2.2-4/
3-5.5
5.5-7.5/
7.5-10
Local Control Panel (LCP), IP 55
132B0200
Mounting kit incl. 3 m cable, IP 55, for LCP
13
4
B0557
Local Operating Pad (LOP), IP 65
175N0128
Motor adapter plate kit:
motor adapter plate, motor plug, PE connector, gasket
for use between FCP 106 and adapter plate, 4 screws
134B0340
134B0390
134B0440
Wall adapter plate kit
a)
a)
a)
Potentiometer option
177N0011
Table 5.3 Options and Accessories, Ordering Numbers
1) Power ratings relate to NO, see chapter 6.2 Electrical Data.
a) Data available upon future release.
5.3.2 Spare Parts
For ordering numbers and ordering in general, refer to
•
VLT Shop at http://vltshop.danfoss.com.
•
Drive Configurator at www.danfoss.com/drives.
Item
Description
Ordering No.
Fan assembly,
MH1
Fan assembly,
enclosure type MH1
134B0345
Fan assembly,
MH2
Fan assembly,
enclosure type MH2
134B0395
Fan assembly,
MH3
Fan assembly,
enclosure type MH3
134B0445
Accessory bag,
MH1
Accessory bag,
enclosure type MH1
134b0346
Accessory bag,
MH2
Accessory bag,
enclosure type MH2
134b0346
Accessory bag,
MH3
Accessory bag,
enclosure type MH3
134b0446
Table 5.4 Ordering Numbers, Spare parts
5.3.3 Parts Required for Installation
Additional items required for motor connection:
Crimp terminals
•
3 pcs for motor terminals, UVW
•
2 pcs for thermistor (optional)
AMP standard power timer contacts, TE order
numbers:
•
927827 (0.5-1 mm
2
) [AWG 20-17]
•
927833 (1.5-2.5 mm
2
) [AWG 15.5-13.5]
•
927824 (2.5-4 mm
2
) [AWG 13-11]
For full installation information including motor
connection, refer to the
VLT
®
DriveMotor FCP 106 and FCM
106 Operating Instructions
.
Type Code and Selection Gui...
VLT
®
DriveMotor FCP 106 and FCM 106 Design Guide
46
MG03M102 -
08/2015
5
5